PC-5 Gallon Blow Molding Machine
Product: PC-5 Gallon Blow Molding Machine
Shipment Port: Shanghai, China
Delivery time: 1 month
Payment Type: T/T or L/C
Export Markets: Worldwide
DHB-82PC machine is specially for 3 gallon and 5 gallon water barrel and lamp cover with PC Material.
|Number of die||set||1|
|Number of die heating||zone||4|
|Power of die heating||KW||8|
|Max die-pin diameter||mm||150|
|platen opening stroke||mm||350-800|
|Max mould size||mm||550×660|
|Screw L/D ratio||L/D||38:1|
|Number of heating zone||zone||8|
|Extruder heating power||KW||20|
|Extruder driving power||KW||34|
|Oil pump drive power||KW||45|
|Fan power for screw||KW||0.9|
|Average energy consumption||KW||42|
2. Using the German Siemens TP700 color touch screen 7-inch color screen, 800 x 480 resolution, 16 mega pixels.
3. With platform lifting function which can adapt to different mold height and blow molding process requirements.
4. The hydraulic system adopts proportional technology to optimize the design of hydraulic circuit and has the characteristics of electricity saving, quick movement and easy to adjust the parameters.
5. Oil path flow velocity and pressure controlled by double-proportion valve; flow direction controlled by reversing valve; deceleration valve brake functions smoothly and quickly. The automatic lubrication system to reduce equipment maintenance workload.
6. It adopts famous factory’s pneumatic, hydraulic and electrical control components which has long service life.
7. Die head plastic pressurizing piston and material accumulation chamber use extremely hard wear-resistant material and hence long service life and durable.
8. The machine is equipped with down widen device, which can stretch the material tube to both sides, and then blow up to make the bottle shape more symmetrical and full.
9. For large diameter pipe, the machine is equipped with pre-clamped embryo device adhesive nozzle to pen blowing.
10. Pre-sealed cutter device can ensure that the length of the extruded tube is consistent so as to avoid the waste of raw materials and cannot be blow molding caused by the too long tube.
11. Strengthen and hard cold processing screw, equipped with plastic die head, double plasticizing, good plasticizing effect, large amount of extrusion screw, barrel wear resistance.
12. The force design of the mould plate center ensures the balance of clamping force.
13. The whole mold template system are used ductile iron, which is stable and solid, durable and not deformed.
2.The new platform design for the die head, the lifting platform and head-rising separated from each other, not only making the rise of the die head more stable, but also the die head can move forwards and backwards.
3.According to the double pump, proportion flow valve, the power consumption can be decrease;
4.Automatic lubrication system;
5.It also has down blow pin, down widen device, double clamping and robot hand;
6.It could be optional configured with tele maintenance system；
7.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
8.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
9.Strong clamping force with high pressure and double crank links to lock the mold.
10.Two ways of operating: automatic and manual.
11.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand